|  Press
the button to turn the thermometer on.
• Open the protective cap.
•Hold the thermometer as it was a
pen.
• Press the button “on”
(mod. 0700A2) or “face”  (mod.
01500A3) to activate the tracking lights
and keep it pressed (in mod. 01500A3 the
display will visualize the symbol
).
• Get the thermometer close to the
forehead, you will notice two points, out
of focus if the thermometer is too far;
on the contrary they will be definite if
it is too close. When Thermofocus is at
the correct distance (about 3 cm from the
forehead), the two lights will converge
in only one luminous point.
• Release the button
keeping the thermometer still until the
lights flash.
• Read the value visualized
on the display.
• If you wish, you
can immediately take other measurement.
• Put the protective
cap back on, rotating it lightly.
Do
not be afraid if the tracking lights are
unintentionally directed to the eyes: they
are totally harmless!
It is possible
to measure the temperature of any object
that has a temperature between 1 and 55°C
acting as it follows:
Mod. 01500A3 - use the button
“house” 
(the value thus obtained corresponds to
the object's temperature).
Mod. 0700A2 - use the button “on”
and
subtract the value indicated on the tag;
(the value thus obtained corresponds approximately
to the object's temperature, but the precision
is lower if compared to the one of mod.
01500A3).
Read the instructions
and the direction for the use carefully.
|
